Sensor
tape
DOWNLOAD
Sensor
tape
For high sensitivity applications where a more basic, low cost system is required. The Single Zone Tape is a very strong, easy to install sensor. The sensor can be wetted and dried any number of times. The zones can be any length but the usual length is between 5 and 15m.
- Applications
– In the voids below raised floors
– Above suspended ceilings
– Tie–wrapped to individual pipes
– Run in drip trays
– Laid around the base of an item of plant, apparatus or tank
– Laid in loops or wave pattern for general monitoring of larger areas
– No minimum or maximum length - Detection
Activates with any conductive liquid anywhere along its entire length
Multiple re–use, dry and reset
Easy to replace or splice–in new length if damaged or hopelessly contaminated - Construction
Polyester “woven” construction. No exposed conductors. Very high strength and abrasion resistance.
- Dimensions
20mm x 3mm thick. Supplied in any length either pre–connected at the factory or for cutting on site. - Fixing
Fix to floor or other surfaces with at ribbon type clips or self–adhesive clips or tie–wraps. Detection Tape is laid loosely with warning labels attached at regular intervals to warn of its function. - System
Connection can be made directly to any Floodline Control Panel/Unit or via Leader Cable.